Remove the spring strut support bearing
WARNING:
Pyrotechnic components.
Danger! Life-threatening injuries!
Danger! Life-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS on handling components with gas generators.
Preliminary work
- Deactivate the 48 v ELECTRICAL SYSTEM .
- Disconnect all battery EARTH LEADS .
- Remove rear left or right WHEEL .
- Remove rear wheel arch COVER .
- Remove the camber control arm COVER .
- Remove the storage shelf TRIM PANEL .
- Remove rear upper SEAT BELT .
- Set the SOUNDPROOFING mat aside.
- Remove rear spring strut SHOCK ABSORBER .
- Prepare the SPRING TENSIONER
- Tension the COIL SPRING .
NOTE:
TECHNICAL INFORMATION
Releasing and tightening the nut on the support bearing or strut mount with an impact screwdriver is prohibited.
Releasing and tightening the nut on the support bearing or strut mount with an impact screwdriver is prohibited.
