Tightening the VANOS central valve

• Have the special tool 2 469 138  ready.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Have all the special tools and commercially available tools ready.

  Number	Description
  1	Standard torque wrench
  2	Wrench socket set 2 450 487
  3	Reversible ratchet 0 496 855
  4	Commercially available reduction
  5	adapter 2 469 138

  Courtesy of BMW OF NORTH AMERICA, INC.

• Assemble all the special tools and commercially available tools as shown.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Use the reversible ratchet (2) from the special tool 0 496 855  with the special tool 2 450 487  to tighten the VANOS central valve (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Use special tool 0 496 855  to tighten the VANOS central valve (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the VANOS central valve of the intake adjuster (1) with special tool 0 496 855  or 2 450 487. 
  TIGHTENING TORQUES SPECIFICATION
  
  

  VANOS central valve to camshaft
  M12 x 1	1. Joining torque	30 Nm
  	2. Joining torque	50 Nm
  	3. Angle of rotation	65°
  M21 VANOS central valve on the thread and on the contact surface must be coated with engine oil.	1. Joining torque	50 Nm
  	2. tightening torque	140 Nm
  M22 VANOS central valve on the thread and on the contact surface must be coated with engine oil.	1. Joining torque	50 Nm
  	2. tightening torque	140 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten VANOS central valve of the exhaust camshaft adjuster (1) with the special tool 0 496 855. 

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CRANKING ENGINE TWICE (AUTOMATIC TRANSMISSION) .
• Refer to DISASSEMBLING ALL SPECIAL TOOLS .
• Refer to INSTALLING CYLINDER HEAD COVER .
• Refer to INSTALLING BOTH ACTUATORS .
• Refer to PREPARING THE INJECTORS FOR INSTALLATION .
• Refer to INSTALLING THE INJECTORS FOR THE CYLINDERS 4 TO 6 .
• Refer to INSTALLING THE INJECTORS FOR THE CYLINDERS 1 TO 3 .
• Refer to PREPARING FOR THE INSTALLATION OF THE HIGH PRESSURE PUMP .
• Refer to INSTALLING HIGH PRESSURE PUMP .
• Refer to INSTALLING THE HIGH-PRESSURE LINE BETWEEN THE HIGH-PRESSURE RAIL AND THE HIGH-PRESSURE PUMP .
• Refer to INSTALLING FUEL DELIVERY LINE .
• Refer to REPLACING SPARK PLUGS .
• Refer to INSTALLING THE IGNITION COILS .
• Refer to INSTALLING FRONT ENGINE ENCAPSULATION .
• Refer to INSTALLING INTAKE SILENCER HOUSING .
• Refer to INSTALLING THE RESONATOR WITH THE TOP CLEAN AIR PIPE .
• Refer to INSTALLING FAN COWL .
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
• Refer to INSTALLING CENTER BULKHEAD LOWER PART .
• Refer to INSTALLING THE SEALING FRAME ON LEFT AND RIGHT .
• Refer to INSTALLING ACOUSTIC COVER AT REAR .
• Refer to INSTALLING ACOUSTIC COVER AT REAR .
• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to INSTALLING THE FRONT HOOD SEAL AT THE REAR .
• Refer to INSTALLING STARTER MOTOR .
• Refer to CONNECTING NEGATIVE BATTERY CABLE .
• Refer to CONNECTING THE DIAGNOSTIC SYSTEM FOR POSSIBLE INTEGRATION LEVEL ENCODING AND PROGRAMMING .
• Refer to INSTALLING THE THRUST FIELD .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to TAKING HOOD OUT OF THE SERVICE POSITION .
• Refer to CHECKING ENGINE OIL LEVEL .