Securing On Engine And Transmission Holder
Special tools and workshop equipment required
Procedure
-- Insert the Transmission Holder: T40407 in the Engine and Transmission Holder: VAS 6095A .
Risk of damaging the transmission by mixing ATF and transmission fluid (MTF) through the same bleeder.
- The transmission filled with ATF and (MTF) transmission fluid must be tilted a maximum of 15° in lateral and longitudinal direction.
- If more of an incline is needed, then the ATF and MTF transmission fluids must be drained.
- Drain the ATF. Refer to ATF, DRAINING AND FILLING .
- Drain the transmission fluid. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .
Transmission maximum tilt
-- Insert the Transmission Holder: T40407 in the Engine and Transmission Holder: VAS 6095A .
-- Lift the transmission using the Hook and Support Tool: T40406 -1-. Refer to TRANSMISSION, TRANSPORTING .
-- Guide together the transmission using the Transmission Holder: T40407 -2- and tighten.
Bolt -arrow A- = M10 X 80 "8.8"
Bolt -arrow B- = M10 X 120 "8.8"
Bolt -arrow C- = M10 X 50 "8.8"
Bolt -arrow D- = M10 X 50 "8.8"